Best Choice of the floor for home and apartment

Before we make a decision on exact solutions, it is worth bearing in mind not only the obtainable budget and planned interior design but above every one functionality. The option of the floor is greatly influenced by reason of the room, the figure of citizens who will usually use it, Decorative Timber Wall Panels the attendance of pets, and the planned fitting of underfloor heating.

Resistance to destruction and Choice of the floor for the whole house

Installation of floors require not only substantial financial outlays, but also radical change and taking leave of all furniture from the rooms. For this cause, it is improved to decide a floor in advance that will not wear out in a small number of years of usual use but will serve us still more than a few decades. Wooden floors - representative parquet, floorboards, and wooden panels are characterized by a very long toughness. This type of surface can last up to 100 years! Floor panels made of wood-based resources are less durable.

What wood species should I choose for a floor in an apartment?

If we make a decision on a wooden floor, we will have an option of wood species with dissimilar hardness - they should be chosen depending on the reason of the room. To the bedroom, Class II wood species (e.g., maple or pine) is sufficient for adults. A superior amount of hardness of wood will be helpful where the floor is additional bare to scratches or dents, i.e., in rooms where a lot of people pass, where children play, or animals are there. In this case, we suggest class III (from domestic trees: oak, beech, ash and cherry, and from exotic.

I am choosing a floor from floor panels - how to read their markings correctly?

When choosing a floor panel, we should be guided by their usability and scrape class. The usability class designation consists of two digits. The first of these indicates which type of room the panel type is suitable for (2 - domestic rooms, 3 - public facilities). The second digit indicates the panel's suitability for a given traffic intensity (1 - low traffic, 2 - medium, 3 - high). For example, panels marked with number 21 are suitable for domestic rooms with low traffic, i.e., for the bedroom or living room. In turn, panels of class 33 are intended for public buildings frequented by a large number of people - for example, shops or dance halls. The second parameter that is worth paying attention to is the abrasion class of the panels. It is marked with signs beginning with the letters AC. The following digit indicates the resistance of the panels to abrasion - from 1 (very poor resistance) to 5 (very high). For home use, panels with class 1-3 abrasion are sufficient, while for public utilities, it is best to use those of class 4-5.

Care, maintenance and renovation of the floor

Traditional wooden parquet will easily last for several decades, but due to the natural process of graying, warping wood, and the formation of gaps, it requires systematic maintenance, and sometimes also sanding.

Wall panels - how to choose? What's the best?

Wall decorations need not be limited to painting or covering them with wallpaper. There are also other, equally attractive ways to arrange this space – one of them is wall mounting. Which of them will be suitable? Only a few years ago, thin wooden or wood-based panels played the role of panels, which were installed primarily in homes, less often in apartments. Currently, we need, Liquid Dance Floor, the offer is definitely wider, thanks to which it is possible to choose panels from a dozen or so of their models, as well as to adapt them to a specific room.

Which wall panels should you choose?

They differ mainly in terms of the materials used. Considering this, we can mention:

Gypsum wall panels – products made on the basis of plaster are characterized above all by the possibility of imitating natural stone, thanks to which the obtained effect can turn out to be very attractive, especially when we decide on panels with cavities or irregular shapes. You can also find 3D gypsum wall panels on the market. Gypsum is distinguished by its natural, fully ecological character, which may also be beneficial for many. Despite the fact that it is often reinforced with fiberglass, this type of panels should not be installed in the kitchen or bathroom. The influence of moisture can lead to their destruction,

PVC wall panels – are distinguished primarily by lightness and simplicity of installation. They are also relatively cheap, but this does not affect their durability too much. They do not deteriorate under the influence of water, which is why they can be installed in the living room, bathroom, or kitchen. Mention should also be made of their modern style, which blends well with slightly dimmed lighting. In addition, they are quite easy to clean, and can also be used to suppress sounds in the room,

Upholstered wall panels – these are very soft and thick “blocks.” They muffle all sounds well, and they can slightly warm our room. They come in many colors, so they can be easily adapted to our furniture. However, they are only suitable for the living room, bedroom, and living room – they are not resistant to moisture. Let’s also remember that in many situations, cleaning them can be a challenge,

Openwork wall panels – these are panels with often fancy holes that work very well as partitions – they filter the light and use them to create attractive shapes from the shadows. However, they are not very resistant to mechanical damage,

Concrete wall panels – are distinguished primarily by mechanical strength and a very attractive appearance, which will work primarily in rooms kept in a modern and minimalist style,

Aluminum wall panels – they are very resistant, but some arrangement restrictions should be emphasized. Despite appearing in various shades, they are not very attractive to the eye,

Plastic wall panels – their presence will not meet all expectations, but special decorative models are available on the market that imitates, among others, wood. In addition, they are resistant to dirt and moisture, so they can be used in hallways, kitchens, and bathrooms,

Wall paneling panels – once very popular wooden elements or made of wood-based materials. They are not afraid of dirt, so they are often used in the hallways. However, with their appearance, they resemble the aesthetics of past times.

Mosaic Timber Tiles – Make Your Space Beautiful

An amazing mosaic on the walls can be a patterned drawing made of the same or different in shape and the size of solid particles timber mosaic is an unusual finish. It seems that the tree is not sufficiently resistant to moisture, capricious and unstable so that it can be created from it. The thing is that mosaics are most often used in humid rooms, where the tree looks inappropriate. However, the popularity of timber mosaics is increasing every year. The reason is the unique aesthetic characteristics that are due to the pattern of timber fibers and a variety of colors, as well as the durability and strength of the finished coating.

What are timber mosaics made of?

All of the above qualities are based on the right choice of materials. If for decoration you take an ordinary pine, then a durable and beautiful coating will not work. Hard timber species are required here, for example, beech, oak, hornbeam, walnut, wenge. To protect the timber from moisture, impregnations of oil and wax are used. But even with them, the mosaic is not applied where water can get.

In addition to different types of timber, coconut shells are used to make timber mosaics. It is very durable, has a very interesting texture and relief. They are emphasized using tinting and styling methods.

An interesting decorative effect gives bamboo. It is cheaper than other materials, but it creates a beautiful coating. A feature of bamboo tiles is a peculiar pattern of fibers, emphasized by special means. The disadvantage of this material is a loose structure, due to which strength and wear resistance is quite low.

Features of laying timber tiles

Timber mosaics can be used to veneer any surfaces that are previously prepared. They must be leveled and primed. If there are bumps, they will be noticeable under the coating. The primer will provide better and even adhesion.

Mosaic made of timber is not necessary to layout independently in small pieces. It is available in the form of modules in which the timber elements are fixed to the grid. Anhydrous adhesive compositions, for example, parquet adhesive, are used to fix the modules. Timber elements are lightweight, so they hold well on the walls.

Mosaic Timber Tiles can be fixed on the surface of the plywood. In this case, they do not need to be specially prepared. But it is worth remembering the diagonal docking to avoid deformation.

To fill the seams of such a mosaic, two-component epoxy grout is used. Minerals should not be used. A tree changes its size depending on temperature and humidity. The mineral composition is cracking. In addition, it is washed off with a large volume of water, which harms the timber surface.

For areas where water can get to the surface, the teak mosaic is suitable. It comes in the form of modules on a cork substrate. The joints are already filled with silicone sealant. Fix the modules on the glue for the cork, and the seams are sealed with sealant.

Recycled Timber Panels – Thing By Which You Can Decorate Your Space

All timber is an orthotropic material found as the main content of a tree trunk. The main characteristic of trees is to have trunks that grow every year and are composed of cellulose fibers bonded with lignin.

Specializes In Timber Flooring

A company created a line of panels, with architectural applications, which have sustainable characteristics. Its greatest peculiarity is that they are made with recycled timber panels. This process allows giving a new life to those old boards coming from boxes, wine barrels, demolitions … The recovered timber is converted into timber panels (free of formaldehyde)

As timber is produced and used by plants for structural purposes, it is a very resistant material; This characteristic, together with the abundance with which it can be found, allows it to be widely used by man.

Timber has many purposes:

• Manufacture of pulp to make paper
•  Timber Panels
• Household

Is timber recycling necessary?

The rational use of raw materials and our products is essential for sustainability.

Thousands of tons of timber waste are generated which, if not recycled, would go to landfills and a greater felling of trees would be necessary. The timber recycling is as much or more necessary when the materials are finite.

Recycling process

The timber recycling is one of the cleanest and most economical of all types of recycling. Without the need to give any previous treatment, the whole process is formed by physical means and machinery.

Timber that can be recycled comes mainly from industries and, to a lesser extent. The industries discard timber waste such as pallets (broken or not), timber coils, furniture, chipboard, boxes and boxes, cuttings, shavings, sawdust, pruning .Of the most of the waste usually comes from broken furniture.

Arrival of the material at the plant

Once the truck arrives at the plant loaded with timber, the first thing that is done is a control. The weight and origin of it are noted.

An eye inspection follows. This determines the quality grade and the type of timber. Normally the timber is mixed with other types of waste, such as plastic, cardboard, metals, that will have to be separated and managed separately.

Trituration

This is the main part of the entire timber recycling process. Here comes the previously separated and selected timber, and it is crushed until it gets shavings or sawdust.

• Metal parts, such as nailed screws, are separated in this part of the process.
• Once this simple process is finished, we find a uniform and clean product.

What is done with recycled timber?

There are occasions when it is essential to resort to certificates that guarantee the sustainable origin of the timber. This is essential if we are doing architecture or furniture, that we want to respect the environment. But there are those who think that the most logical route of all should not be left aside: recycling. That is why in the case of timber, the most ecological thing would be to use reclaimed timber.

Architectural Recycled Timber – Reuse Of The Wood With Great Efficiency

Wood is a natural, renewable, recyclable resource and has innumerable properties such as being an excellent thermal insulator. This equation provides a priori a harmony with the environment in addition to great energy savings, among other benefits. Architectural Recycled Timber is reuse of the timber.

The 21st century finds wood as the material of the present and future. The need to use more and more sustainable elements on site and contribute from architecture to use less environmental resources, have positioned this traditional and historical building material, on the podium of those chosen by professionals. This has ceased to be a trend to become a worldwide phenomenon.

It is common today to hear terms such ArchitecturalRecycled Timber, or Passive Houses: here all roads seem to lead to wood, the material chosen by the vast majority of builders involved with these themes. The Platform Frame system, also known as timber framework, which by the way is the most used in the world but little spread in Argentina, is the most chosen by the most renowned national and international architects.

Generally, construction works  cause great environmental impact, because the materials and tools used generate different types of gases and emissions.  The aims to minimize such pollution, helping to create a sustainable development that does not deplete the planet but is a generator and regulator of the resources used to achieve a healthy habitat and in harmony with the rest.

This phenomenon is moving steadily towards a way of building respectful of all living beings. That is, Architectural Recycled Timber does not affect the evolutionary processes of man or biodiversity, guaranteeing balance and promoting a healthy life for future generations.

It is also observed in these trends of environmental architecture, a return of wood in traditional work elements such as openings, floors, coatings and moldings.

The contributions of wood:

The phenomenon of the cultivated forests has removed pressure to the use of native woods. In Argentina, for example, 95% of the forestry industry works on this type of forest.

The wood is sustainable, since making responsible use and sustainable use helps increase forests.

During their period of growth, forests fix a large amount of CO2 inside, one of the gases that cause the greenhouse effect. But, it is the young forests that fix more carbon. Adult forests, those that have almost reached their maximum growth, fix very small amounts of carbon. Therefore, it is necessary to make sustainable use of forests that have already reached their maximum growth, favoring their regeneration and growth.

Functional and environmental advantages of wood in work:

• It is a durable material, with the new technologies applied to wood treatments, peripheral impregnation processes (especially rapid immersion) and deep impregnation processes by empty autoclave and pressure, sufficient penetration levels are obtained, which they preserve the properties of the wood, being able to be renewed, with a simple maintenance process

•Architectural Recycled Timber is  Renewable, reusable, recoverable and recyclable material, from sustainable, attractive and technically advanced sources of supply.

• Due to its cellular structure, wood is an excellent thermal insulator, avoiding sudden changes in temperature, thus reducing the need to heat or cool the environment.

Decorate Your Place With Mosaic Timber Tiles

The mosaic cladding has a special charm, as it offers a set of almost inexhaustible combinations to create new effects on the decoration of walls and floors. It is recommended that you should use perfect Mosaic Timber Tiles for your project.

Tiles are an important part of decoration materials, and the choice of tiles should be especially cautious. In recent years, the mosaics that appear in the market have been favored by many consumers

Mosaic Timber Tiles is a special type of tile, which is usually made up of dozens of small tiles and relatively large tiles. Acid, alkaline, abrasion-resistant, no leakage, strong pressure resistance, not easy to break. Classification of mosaic tiles is divided into Mosaic Timber Tiles, marble mosaic and glass mosaic. Scope of application It is widely used in small interior areas, walls and walls and exterior floors with their small and colorful sizes.

Mosaic characteristics for floors and walls

Mosaic Inside The Hall

In this room, which is ceremonial in its purpose, the decorative possibilities of the mosaic are mainly taken into account. This can be a panel placed on the sofa or fireplace, and if the room is spacious, occupy the entire plane. This will flash and shine with both natural lighting and candlelight, and the play of shadows will give the image the effect of movement.

Since the mosaic is a heat-resistant material and resistant to sudden temperature changes in the range of +15 to + 145 ° С, it can also be used successfully for the external cladding of chimneys. Also decorate the edge of the room on the ceiling, inserts on the floor, lining up columns, window sills and niches with lighting. With the help of a multi color mosaic, you can create spectacular patterns on the surface of the furniture, for example, on the back of chairs, tables, shelves. Depending on the design, you can combine different shapes, textures and degrees of transparency and brightness.

Mosaic Timber Tiles for Exterior

The main surfaces for MosaicTimber Tiles decoration here can be the floor and walls. They will be decorated with a plot panel or, conversely, with small decorative inserts that will rejoice the room remarkably, generally without natural light. Since the mirror is a necessary attribute of the room, it can be decorated with a mosaic frame (the beauty of that frame is highlighted by two lamps mounted on the top).

The mosaics are pieces of different designs and materials that are joined together with a mesh on the reverse.

This mesh serves to make the mosaic pieces form a design. Its installation method is very similar to ceramics, and its characteristics allow it to be used in almost all types of enclosures.

The terminations are bright, opaque or natural; smooth or rough texture, with live or rounded edges.

Characteristics and advantages of the Mosaic Timber Tiles:

•         Quick installation

•         By their colours and shapes you can get varied combinations.

•         The rough ones are non-slip.

•         They are of high durability.

Timber Wall Panels- Decorate Your Dream House

The use of timber in the interior of a house has a long history; it is known that the palaces of the pharaohs were already decorated with timber wall panels. In Europe, such decoration could initially be found only in the mansions of aristocratic persons; By the middle of the 19th century, panel walls had become commonplace in more modest dwellings. In the middle of the last century, timber en wall panels were considered an old-fashioned decoration, but then, thanks to the advent of new technologies, they received a rebirth and became a relevant and sought-after way of decorating the interior.

Why do we need timber panels

The use of such finishes can pursue different goals, which include:

Style decision The most obvious and common reason. The timber finish fits perfectly into any style; its use ennobles the room, giving the atmosphere sophistication.

Zoning space Timber panels are the easiest way to set the tone and create a single space (or vice versa, select part of it).

Utilitarian solution It is convenient to hide engineering communications and all kinds of cables under the casing; the room immediately begins to look not only beautiful but also neat. Sometimes cladding is the easiest way to mask wall defects.

Improved performance Timber has its advantages: it improves the sound and heat insulation of the room; it is a durable material that is periodically refreshed - painted or varnished.

Timber en panels: types

Decorative wall panels are conveniently grouped according to the material of manufacture; The following types of products are on sale:

From the massif of a natural tree - High-quality finishing material, which is in constant demand? Panels made of valuable species occupy a worthy place in the interior of libraries and classrooms. Panels of less valuable varieties, often intended for painting, found wider application; they can be seen both in living rooms and in the corridors. This finish is not suitable for rooms with high humidity.

Particleboard panels (from chipboard). The budget option, which is obtained by hot pressing sawdust mixed with a binder resin. The front surface is glued with veneer or timber en mosaic; in another embodiment, painted after installation. Particleboard panels not badly improve the thermal insulation of the room, but are characterized by limited moisture resistance. This property excludes their use for decoration of rooms with high humidity (kitchen, balcony).

From bamboo and rattan Light and moisture resistant, they are not used as often, mainly for interiors in an exotic style (Asian, African) or country style.

3 D panels Individual parts from an array of different species are glued onto a ply timber base by hot pressing; the result is an unusual product with a complex profile. For production, only valuable and high-strength timber species are used, which (together with manufacturability) explains the high cost of this finishing material. The surface is treated with wax or varnish; the resulting film serves as reliable protection against moisture and contamination.

Timber wall panels are decorated in other ways. For decorative finishes, embossing is actively used when the pattern is applied to the panel by pressing. Gilding, mirror inserts, carving are used. Panels with a complex geometric relief made using milling are used to decorate interiors in classic and English styles, often for art nouveau or art deco styles.